You have no items in your shopping cart.


About HyRoc



HyRoc is a very easy way to create hygienic surfaces in any environment



HyRoc wall and ceiling cladding provides a complete hygienic surface for your project



HyRoc is a very cost effective way to create hygienic wall and ceiling surfaces


HyRoc wall cladding comes in 8’ x 4’ (2440 x 1220mm) and 10’ x 4’ (3048 x 1220mm) sheets in three grades:

Medium density for the majority of catering applications

Low density for particularly light duty and low impact areas

High density for particularly heavy duty and high impact areas

The range comes with everything you need to create a hygienic wall surface.

Simply cut your sheets to size and fix them to the wall with Hi-Fix adhesive. Sheets are joined with our H sections, and finished at the edges with a J section. Internal and external angles are used to finish the corners. We also provide universal angles for unusual corners, and drive rivet fixings for those walls that may not be suitable for adhesive alone. Other sundry items include skirting, silicone and cartridge guns make sure you have everything you need for the job.


The HyRoc ceiling cladding system makes it easy to create a hygienic washable ceiling surface.

The system comprises 250mm wide planks of extruded PVC in a tongue-and-groove style. Simply fix the edge trim to the perimeter of your ceiling, cut the planks to size, and fit them into the edge trim. Planks are glued to the ceiling surface and held in place with screws through the back flange. Carry on fitting the planks until the ceiling is complete. If your ceiling is wider than the planks, our H section provides a neat join between the plank ends.

For full installation information, please refer to our downloads page.

Click here to view the HyRoc range of hygienic wall cladding materials: